ISO 9001: 2015 quality management systems. It was
published by the International Organization for
Standardization. And we base on quality management
principles: (1) Customer focus (2) Leadership
(3) Involvement of people (4) Process approach
(5) System approach to management (6) Continual
improvement (7) Factual approach to decision making (8) Mutually beneficial supplier
relationships.
PUMP TYPE AND LIQUIDS SERVICEABILITY SPECIFICATION
3
Pump Type
Liquids Serviceability
DSXX-AAX-UXXX-X
Paint, Solvent, Ink, Glue, Pulp, Heavy Oil, Toluene, Benzene
DSXX-AAX-TXXX-X
Hight temperature liquid, Resin, Metal Scrap Solu
�
on, Gasoline, Xylene, Acetone
DSXX-AAX-OXXX-X
Mud, Sludge, Waste Water, Lubrica
�
on Oil, Motor Oil, Cu
�
ng Oil, Turbine Oil, Methyl Alcohol, Release Agent,
Cas
�
ng Fluid
DSXX-PXX-OXXX-X
Seawater, Hydrogen Peroxide Solu
�
on, Acid and Alkali, Floats the Clean Water
DSXX-PXX-TXXX-X
Inferior Sodium Nitrite, Hydrochloric Acid, Aqua Regia, Phosphoric Acid, Boric Acid, Liquid Medicine
DSXX-SXX-UXXX-X
Glycol, Alcohol, Sodium Hydroxide, Nitric Acid, Carbonic Acid, Fruit Acid, Enzyme, Sodium Nitrate, Ethanol, Citric Acid,
Wastewater, Liquid Caus
�
c Soda, Methyl Alcohol, Isopropyl Alcohol, Glycol
DSXX-SAX-TXXS-X
Polyvinyl Chloride, Ammonia, Asphalt, Sulfuric Acid, Chromic Acid, Electroplate Solu
�
on, High Temperature Sauce,
Chili Sauce, Coal Oil, Vola
�
le Oil, Carrier Oil, Immiscible Fluids, Freezing Mixture, Degreasing Agent, Methylene
Chloride, Jam, Juice, Ace
�
c Acid, Leavan, Slops, Balsam, Olive Oil, Defoamer
※
DSXX-SAX-OXSO-X
Glaze, Po
�
ery Clay Thick Liquid, Bolivian Filament
Note:
◆
Depending on the density, temperature, concentration, and fluid production of the liquid, it may not be usable.
◆
If it is used for the abrasive fluid, please make sure wear-resisting property.
◆
Please inquiry with us directly about other liquids, if this information is above-unmentioned.
◆
Please see the type-specification comparison.
◆
Please inquiry to us about the type-specification noted “
※
” advance.
II 2 GD c IIB T4~T5
II (Explosive atmospheres, like flammable gases or dust.)
2 ( Protection level: exist it during operation, in explosive gas>10~1000hrs )
GD ( Dangerous source: gas, dust) c ( Explosion-proof structure: Construction safety)
IIB (Explosion-proof electrical equipment classification: B )
T4~T5 ( Temperature level: the highest surface temperature is below 100
℃
~135
℃
.)
CE marking is a certification mark that indicates
conformitywith health, safety, and environmental
protection standardsfor products sold within the
European Economic Area (EEA). The CE marking is also found
on products sold outside the EEA that have been manufactured
to EEA standards.