dye M3s, Руководство пользователя

Страница: 11 / 29

9
W W W . D Y E P A I N T B A L L . C O M
SERVICE SYSTEM
ON
RESET TO DEFAULT
At any time you can reset the profile you are in to Factory Default
settings.
The Service system tracks shots fired and when the major components
of your marker need to be serviced. You can adjust your service
schedule based on weather and playing conditions. More severe
conditions will require service more often.
To adjust service schedule, scroll to desired service screen. Press the
joystick to unlock the screen for adjustment. Scroll up or down to
desired service schedule. Press joystick to select and save.
When one or more systems are due for service a red “Service” icon will
flash over your play mode screen.
Access the Service System to view what needs service. After service is
performed reset the components system monitor.
To reset any of the service schedules, scroll to the desired service
screen, and press the Joystick to unlock the screen for adjustment.
Scroll Down to “Reset” and Press the joystick. This will reset the service
monitor for the displayed system. If you perform service prior to
receiving a service alert you can re set the service monitors at that time
as well.
BOLT 4,000 or 8,000 shots
HYPER6S PRO 75,000 or 100,000 shots
NOTE: You are given the option to deactivate the Service System. If the Service System is
deactivated you will not be alerted when service is due. We highly recommend you keep
Service System activated in order to help ensure the M3s gets regular maintenance.
1/5
ZERO-START
COUNT
2/5
3/5
4/5
SERVICE DUE
BEFORE SERVICING YOUR MARKER:
• MAKE SURE TO REMOVE THE BARREL FROM THE M3S.
• MAKE SURE YOUR HOPPER IS REMOVED FROM THE M3S.
• MAKE SURE THERE ARE NO PAINTBALLS IN THE BREECH OF THE M3S.
• ALWAYS RELIEVE ALL RESIDUAL GAS PRESSURE FROM THE M3S BEFORE
COMMENCING ANY DISASSEMBLY.
• THE M3S CAN HOLD A SMALL RESIDUAL CHARGE OF GAS, AFTER THE AIR
SUPPLY HAS BEEN REMOVED. ALWAYS DISCHARGE THE MARKER IN A SAFE
DIRECTION TO RELIEVE THIS RESIDUAL GAS PRESSURE.
• THE M3S IS NOT WATER RESISTANT. EXCESS MOISTURE WILL CAUSE
DAMAGE TO ELECTRONIC PARTS.
• KEEP THE BOARD AND ALL ELECTRICAL COMPONENTS CLEAN OF DIRT,
PAINT AND MOISTURE.
• TO CLEAN THE BOARD, USE CANNED AIR. IF A MORE AGGRESSIVE
CLEANING METHOD IS NEEDED, LIGHTLY SCRUB THE COMPONENTS WITH
A SOFT, DRY BRUSH. HEAVY SCRUBBING WILL DAMAGE THE BOARD.
RESET
100000
SHOTS
75000
SHOTS
HIGH PRESSURE
RESET
8000
SHOTS
4000
SHOTS
FUSE BOLT
RESET
100000
SHOTS
75000
SHOTS
SERVICE!!
HIGH PRESSURE
RESET
8000
SHOTS
4000
SHOTS
SERVICE!!
FUSE BOLT
METHOD OS AIR (MOSair)