dye M3s, Руководство пользователя

Страница: 17 / 29

15
W W W . D Y E P A I N T B A L L . C O M
INSTALL STICKY TOOL-LESS GRIPS
• Slide the Sticky grip on to the frame from the rear.
• Press the locking tabs under the molded finger groves into the corresponding slots on the frame’s front strap.
• Pull the top of the grip panel back in order to allow the front top locking hook to drop into the frame.
• Push the top of the grip panel forward to lock the top front hook into place.
• Press down on the upper rear corner to seat the upper retaining post into position.
STICKY GRIP REMOVAL
1. Pull the upper back corner of the grips
away from the gripframe with your thumb.
Allowing the rear tab to clear the frame.
3. The top portion of the grips should now
be free from the gripframe.
2. While pulling with your thumb, use your
index finger, to push the grips toward you.
5. Pull the grip forward and down. 6. In doing so, you will have released the
last three locking tabs that are under the
molded finger grooves.
7. Repeat instructions for reverse side and
slide the grips off the frame.
4. Grab a hold of the inside of the grips with
your fingers, using your palm on the outside
surface of the grip.