Dyconn WA502S, Инструкция по эксплуатации

Страница: 16 / 21

Page 16
Figure 5-1
Step
【
5
】
Adjusting the Display Monitor
Forced movement of Mount Bracket without loosening the Screws will damage Wall
Mount LCD Arms Assembly or display monitor.
Exercise caution when adjusting the display, to support the display to avoid damage to
equipment. Disconnect power before removing the display.
Adjusting the Wall Mount LCD Arm Assembly Resistance
1. To support display monitor when adjusting resistance of the Wall Mount LCD Arm
Assembly. ( See Figure 5-1 )
Adjusting the Mount Bracket Resistance
2. Our Product is brilliantly engineered to control the resistance in the Tilter Mount
Bracket to suit your display swing side to side of 90 degree and tilt forward and
backward of 40 degree. It is possible to control the amount of resistance in the Tilter
Mount Bracket to suit your display monitor.
3. Referring to the weight of the display monitor. If the Tilter Mount Bracket tends to
automatically fall, it may be required to adjust the Tilter Mount Bracket joint to suit your
display monitor tilt place of forward and backward of 40 degree. This can be done by
using Hex Allen Wrench 4mm
(9) supplied, to increase the resistant of the Tilter Mount
Bracket to secure tilt place, adjust the M5x15mm Tension Hex Socket Cap Screw
located around the Tilter Mount Bracket using the supplied 4mm Hex Allen Wrench.
(
See Figure 5-2 )