Page 12
Figure 2-4
3. Determine depth of recessed mounting holes relative to back of surface of display.
4. Select proper length of Screws
(6
、
8)
place the Spacers
(4)
on the back of display,
follow by position and orient the mounting holes in the Tilter Mount Bracket so that the
mounting holes on the Tilter Mount Bracket and Spacers
(4)
are aligned.
(See Figure
2-3)
5. Using Philip Screwdriver, install selected Screws
(6
、
8)
through mounting holes on Tilter
Mount Bracket and Spacers
(4)
, finally into the display monitor. Tighten Screws with
Philip Screwdriver so the Tilter Mount Bracket is firmly attached to the display monitor.
Do not over tighten the Screws. Stop immediately if you encounter any resistance.
(See Figure 2-4)
Figure 2-3
Содержание WA502S
Страница 1: ......
Страница 4: ...Page 4 Supplied Parts ...
