Dycon FS45B, Руководство пользователя

Страница: 8 / 20

FS45B/45BT
7
FS45BT
Operation notice:
1. The forward / backward switch must be in the middle (stop) position before
startup, if it is not in this position, the machine will automatically enter the
protection state.
2. The machine will not accept any instructions after entering the protection state
3. Exit the protection status operation: close the key, return the forward /
backward switch to the stop position, then open the key.
4. Normal operation: when the forward / backward switch is in the stop position,
turn on the key, select the operation switch (brush or suction), select the
appropriate speed, and push the forward / backward switch.
5. When backward, please lift the squeegee.
Storage battery: original configuration floor scrubber are with high performance maintenance
free battery, meanwhile, configure intelligent battery charger which controlled by micro
computer, and maximally improve product cost performance, more convenient for user.
3. Quick operation and pay attention to
Pay attention to before operate
：
1
）
For the first time using machine, operator should be trained.
2
）
in the process of the replacement of the new, the original operator or supervisor to deal
with the new operator to carry out training to teach the operation and attention to matters,
to avoid unnecessary accidents.
3
）
understand, familiar with the place, determine the route of machine, to complete in
easiest and safest.
4
）
Check the battery capacity (the new machine or a longer period of time without the use
of the machine will be full of electricity before use).
5
）
choose brush or cleaning pad according floor situation
This product is a professional equipment, need for training, special operations,
special care, the operator should keep the keys, to protect the safety of
equipment and others!
The purpose of cleaning is to remove the surface dirt on the premise of
protecting the ground, brush, pad selection is not appropriate may hurt
your ground, please pay attention!