FS45B/45BT
15
battery is placed after the end of electricity, and other non standard battery charging, etc.,
all these bad habits speed up the battery damage.
if the battery has this situation in 6months from purchase the machine, please timely
communicate with dealer, supply the photos of product series no. and battery code, as long
as it is not human factor, the factory is responsible to change for you.
Requirement:
must use the original matching charger to charge from factory, each charge must be
charged automatically completed(green light on), can not be interrupted halfway.
to maintain deep discharge cycle use, the lowest safe voltage is 21.5V, the machine will
protect battery automatically, must charge when the machine alarm, regular use of non
depth charge, it will cause the battery can not be charged. when this situation occurs,
you can try to use a continuous deep difull charge, try a few times to see if the
battery is able to recover, if it can not, you should replace battery.
9
）
suction motor is running, but suction power of squeegee is not good effect.
check: (1) if the filter cap in the recovery tank is blocked? the suction nozzle is normal?
(2) if the inlet water of squeegee is blocked?
(3) take down the connection hose of squeegee and check if there is a blackage in
the hose?
(4) under machine on, if the cap of recovery tank can be opened.
method: (1)open suction motor after remove the filter, confirm the intake pipe has suction,
clean the filter, blow it dry, then mount.
(2) removal of foreign bodies and the resumption of the flow.
(3) pull the rubber sealing out and cleaning, then remount, do not press the rubber
too tight, let rubber flat nature when machine working.
10) machine does not have water or the water or the water can not flow out smoothly.
Check: (1) if the drain out water switch on.
(2) if the solenoid valve control type, please check the solenoid valve work is
normal.
(3) the amount of water valve regulation is in place.
(4) check if there is a blockage in the net of filter.
(5) check if there is a press flat in the lower pipe of chassis.
11) suction motor rotate, but can not suction.
Check (1) if the lid of drain out hose is good, cover the lid well.
(2) pull out the connect pipe of squeegee, check if the pipe has suction
？
is there a
blockage? is there blockage on the mouth of squeegee?
a lot of foreign bodies will be blocked in the junction of suction pipe and
recovery tank, troubleshooting: loosen the lock sealing ring that connect
suction pipe and recovery tank, put off the suction pipe.
(3) pull out the sealing strip appropriately, then close the lid, check if it can be
sealed.
12
）
the sound of suction motor is big, suction is reduced.
Check: (1) if there is dirt block the net of recovery tank inlet filter, clean the filter net.
(2) outlet pipe of suction motor and silencer is separation.
Содержание FS45B
Страница 19: ...FS45B 45BT 18 ...
