Dyaco 78562, Руководство по обслуживанию

Страница: 80 / 87

80
7. Maintenance menu / Software
BRAKE TEST
Purpose of this setting is to test the magnetic resistance system.

Press PLAY KEY to enter BRAKE TEST.

MOTOR TEST AUTO is displayed.
o
Press + KEY or - KEY to switch to MOTOR MANUAL and LIMIT SENSOR and EXIT.

Press PLAY KEY.

LEVEL TO 20 displays, Press PLAY KEY.
o
Auto-run motor in a loop from L-1 to L-20 and back to L-1.
o
Press PLAY KEY to end, revert to BRAKE TEST.

MOTOR TEST MANUAL.

Use + KEY and
– KEY to move motor.

Press PLAY KEY to end, revert to BRAKE TEST.
o
ENCODER displays. This is ENCODER count or digital value.
o
Upper Right of display displays LIMIT SENSOR CONDITION.

1 = HOME

2 = ACTIVE RANGE

3 = END
o
Lower display displays Encoder Set Value.

LIMIT SENSOR

S1 ON, S2 OFF

S1 is Home Position

S2 is End Point

EXIT will revert to setting screen.

Press + KEY for next screen or RESET CONSOLE to exit MAINTENANCE MODE.