Customer Service 1-888-707-1880
16
Dyaco Canada Inc. 2016
Email: [email protected]
Getting Started
Power the treadmill on by plugging it into an appropriate wall outlet, then turn on the power
switch located at the front of the treadmill below the motor cover. Ensure that the safety key is
installed, as the treadmill will not power on without it.
When the power is turned on, all the lights on the display will light for a short time. Then the Time
and Distance windows will display Odometer readings for a short time. The Time window will
show how many hours the treadmill has been in use and the Distance window will show how
many miles (or Kilometers if the treadmill is set to metric readings) the treadmill has gone. Then
a message will scroll across the Message Center showing the current software version. The
treadmill will then enter idle mode, which is the starting point for operation.
Quick Start/ Manual Operation
1. Press and release the Start key to wake display up (if not already on).
Note:
Installing the tether key will also wake up the console.
2. Press and release the Start key to begin belt movement, at 0.5 mph, then adjust to the desired
speed using the Speed + / - or Fast/Slow keys. You may also use the quick speed key, then 0
through 9 to adjust the speed.
3. To adjust the speed, press and hold Speed Up / Down keys to achieve desired speed. You
may also adjust to the desired speed by pressing Quick Speed and then 0 through 9.
4. To adjust the Incline level, press and hold the Incline Up / Down keys to achieve desired
gradient. You may also adjust to the desired incline by pressing the Quick Incline key and then
0 through 9.
5. To stop the tread-belt press and release the Stop key.
Pause/Stop/Preset
1. When the treadmill is running the pause feature may be utilized by pressing the red
Stop
key
once. This will slowly decelerate the tread-belt to a stop. The incline will go to zero percent.
The Time, Distance and Calorie readings will hold while the unit is in the pause mode. After 5
minutes the display will reset and return to the start-up screen.
2. To resume your exercise, when in Pause mode, press the
Start
key. The speed and incline will
return to their previous settings.
• Pause is executed when the
Stop
button is pressed once. If the
Stop
key is pressed a
second time, the program will end and a workout summary will be displayed. If the
Stop
button is pressed a third time, the console will return to the idle ode (start up) screen. If the
Stop
button is held down for more than 3 seconds the console will reset.
Incline
1. Incline may be adjusted any time after belt movement.
2. Press and hold the Incline
Up/Down
keys to achieve desired gradient. You may also choose
a more rapid increase / decrease by selecting the
Quick Incline
key, then 0 through 9.
• The display will indicate incline percent in increments of .5 as adjustments are made.
• The incline will return to zero unless the main power switch or safety key are turned off while
it is at a higher setting.
