Customer Service 1-888-707-1880
Dyaco Canada Inc. 2014
Email: [email protected]
19
Pause/Stop/Reset Feature:
STEP 1:
When the treadmill is running the pause feature may be utilized by pressing the red
Stop
key once. This will slowly decelerate the tread-belt to a stop. The incline will go to zero percent.
The Time, Distance and Calorie readings will hold while the unit is in the pause mode. After 5
minutes the display will reset and return to the start up screen.
STEP 2:
To resume your exercise, when in Pause mode, press the
Start
key. The speed and
incline will return to their previous settings.
Pause is executed when the
Stop
button is pressed once. If the
Stop
key is pressed a second
time, the program will end and a workout summary will be displayed. If the
Stop
button is
pressed a third time, the console will return to the idle mode (start up) screen. If the
Stop
button is held down for more than 3 seconds the console will reset.
Incline Feature:
Incline may be adjusted anytime after belt movement.
Press and hold the
Adjust
▲▼
keys (console or hand rail) to achieve desired level of effort.
You may also choose a more rapid increase / decrease by selecting desired key, 2 through 12,
on left hand side of console (incline).
The display will indicate incline percent as adjustments are made.
Incline will remain in it’s position when display is turned off.
Dot Matrix Center Display
(Manual Operation)
:
Twenty four rows of
“
dots
”
(10 high) indicate each segment of a workout.The dots are only to show
an approximate level (speed/incline) of effort. They do not necessarily indicate a specific value - only
an approximate percent to compare levels of intensity. In Manual Operation the Speed / Incline dot
matrix window will build a profile “picture” as values are changed during a workout.
Next to the Dot Matrix window are three LEDs labeled: Track, Speed and Incline, along with a Display
button. When the Track LED is lit the Dot matrix displays the Track profile, when the Speed LED is lit
the Dot matrix displays the Speed profile and when the Incline LED is lit the Dot Matrix displays the
Incline profile. You may change the Dot Matrix profile view by pressing the Display button. After
scrolling through the three profiles, by pressing the Display button, the Dot matrix will automatically
scroll through the three displays showing each one for four seconds. The LED associated with each
profile will blink while that view is displayed. One more press of the Display button will return you to
the Track profile.
1/4-Mile Track:
The 1/4-mile track will be displayed around the dot matrix window. The flashing dot indicates your
progress. Once the 1/4-mile is complete this feature will begin again. There is a lap counter in the
center of the track for monitoring your distance.
