Customer Service 1-888-707-1880
6
Dyaco Canada Inc. 2016
Email: [email protected]
WARNING!
●NEVER
use a ground fault circuit interrupt (GFCI) wall outlet with this treadmill. Route the power cord
away from any moving part of the treadmill including the elevation mechanism and transport wheels.
●NEVER
remove any cover without first disconnecting AC power.
●
If voltage varies by ten percent (10%) or more, the performance of your treadmill may be affected.
Such conditions are not covered under your warranty
. If you suspect the voltage is low, contact your
local power company or a licensed electrician for proper testing. See Diagnosis Guide, page 35.
●NEVER
expose this treadmill to rain or moisture. This product is
NOT
designed for use outdoors, near
a pool or spa, or in any other high humidity environment.
Circuit Breakers
: Some circuit breakers used in homes are not rated for high inrush currents, (ARC fault
breakers are one example) that can occur when a treadmill is first turned on or even during use. If your
treadmill is tripping the house circuit breaker (even though it is the proper current rating) but the circuit
breaker on the treadmill itself does not trip, you will need to replace the home breaker with a high inrush
type. This is not a warranty defect. This is a condition we as a manufacture have no ability to control.
This part is available through most electrical supply stores. Examples: Grainger part # 1D237, or
available online at www.squared.com part # QO120HM.
This product must be grounded.
If the treadmill should malfunction or breakdown, grounding
provides a path of least resistance for electric current, reducing the risk of electric shock. This product
is equipped with a cord having an equipment-grounding plug. The plug must be plugged into an
appropriate outlet that is properly installed and grounded in accordance with all local codes and
ordinances.
DANGER - Improper connection of the equipment-grounding conductor can result in a risk of
electric shock. Check with a qualified electrician or serviceman if you are in doubt as to whether
the product is properly grounded. Do not modify the plug provided with the product if it will not
fit the outlet; have a proper outlet installed by a qualified electrician.
●NEVER
operate this treadmill without reading and completely understanding the results of any
operational change you request from the computer.
●
Understand that changes in speed and incline do not occur immediately. Set your desired work level on
the computer console and release the adjustment key. The computer will obey the command gradually.
●NEVER
use your treadmill during an electrical storm. Surges may occur in your household power
supply that could damage treadmill components.
●
Use caution while participating in other activities while walking on your treadmill, such as watching
television, reading, etc. These distractions may cause you to lose balance or stray from walking in the
center of the belt; which may result in serious injury.
●NEVER
mount or dismount the treadmill while the belt is moving. Spirit treadmills start with at a very
low speed and it is unnecessary to straddle the belt during start up. Simply standing on the belt during
slow acceleration is proper after you have learned to operate the unit.
●
Always hold on to a handrail or hand bar while making control changes (incline, speed, etc.).
Do not use excessive pressure on console control keys. They are precision set to function properly with
little finger pressure. Pushing harder is not going to make the unit go faster or slower. If you feel the
buttons are not functioning properly with normal pressure, contact your Spirit dealer.
Important Electrical Instructions
