- 2 -
M965536 Rev. 1.7 (4/17)
1
INSTALL FITTING
• Make certain the O-RING
(2)
is properly seated in recess of FAUCET BASE
(3)
.
• Insert HOSES
(4)
and SHANK
(9)
through center hole of sink or mounting surface.
• Assemble three BRASS SCREW
(8)
into the FIXATION RING
(7)
.
• Assemble SUPPORT PLATE
(5)
METAL WASHER
(6)
, and
FIXATION RING
(7)
onto SHANK
(10)
from underside of sink.
Hand tighten the FIXATION RING
(7)
and check that
FAUCET
(1)
is centered.
• Use a screwdriver to tighten SCREWS
(8)
on FIXATION RING
(7)
.
Work your way around FIXATION RING
(7)
, tightening the SCREWS
(8)
slightly each time until all are snug to ensure even pressure.
CAUTION
Turn off hot and cold wate
supplies before beginning.
5
8
6
7
4
9
2
3
1
