DXV Rem D3510045C, Инструкция по установке

Страница: 3 / 4

- 3 -
M965701 Rev. 1.1 (5/17)
3
4
INSTALL HANDLES
• Turn VALVE STEMS
(15)
to off position.
• Align LEVER HANDLES
(16)
as shown and install onto ADAPTER
S (10)
.Tighten SET SCREW
(17)
with
HEX WRENCH (14) supplied. Install PLUG BUTTONS (18) .
INSTALL WALL SPOUT
• Twist and pull off PLASTER GUARDS
(1)
. Thread counter clock-wise ROUGH-IN NIPPLE
(2)
with a flat blade screwdriver
and remove.
• Inspect that SPOUT NIPPLE O-RINGS
(3 & 4)
are seated in the grooves of SPOUT NIPPLE
(5)
. See View “A”.
• Thread SPOUT NIPPLE (5) into VALVE BODY (6) and tighten until O-RING (3) is fully seated against VALVE BODY (6) .
• Mount WALL ESCUTCHEON
(9)
. Thread ADAPTERS
(10)
onto VALVE
(11)
until WALL ESCUTCHEON
(9)
is flush
against finished wall.
• Inspect that ADAPTER O-RINGS
(3, 4)
are seated in the grooves of ADAPTER
(5)
. See View “A”. Install ADAPTER
(5)
into spout outlet and tighten with wrench. Thread SPOUT ADAPTER (7) onto ADAPTER (5) so that the groove
extends 9/16" beyond face of ESCUTCHEON. See View “B”.
• Push SPOUT (12) onto SPOUT ADAPTER (7) until flush against WALL ESCUTCHEON (9). If SPOUT is not against
WALL ESCUTCHEON
(9)
pull spout off and adjust SPOUT ADAPTER
(10)
.
• Tighten SET SCREW (13) with HEX WRENCH (14) supplied.
13
17
14
4
4
5
3
2
1
1
View A View B
VIEW "A"
VIEW "B"
VALVE STEM
OFF
OFF
VALVE
STEM
5
6
7
11
9
11
10
12
10
16
16
8
SPOUT
O-RING
18
15
15
14
9/16"
(14mm)
GROOVE
FINISHED
WALL
GROOVE
ESCUTCHEON