manualshive.com logo in svg

DXV Percy Series, Руководство по установке

Поделиться
Скачать
DXV Percy Series Скачать руководство пользователя страница 5

- 5 -

M965533 Rev. 1.6 (1/18)

4

4a

MAKE WATER SUPPLY CONNECTIONS

TEST INSTALLED FAUCET

•  Connect HOT water supply to LEFT INLET UNION

 (1)

 and COLD water supply to RIGHT INLET UNION 

(2)

. 

Pipe connections are 3/4" (19 mm) NPT. Use sealant or Teflon tape on pipe connections. 

Do not solder directly to valve body.

• Remove AERATOR from FAUCET.
• With HANDLES in OFF position, turn on WATER SUPPLIES and check all connections for   leaks.
• Operate both HANDLES to flush water lines thoroughly.
• Replace AERATOR.
•  Lift HAND SHOWER from HOLDER, direct spray into tub. Lift TRANSFER KNOB to check HAND SHOWER 

and HOSES for   leaks.

• Turn handles “off” and replace HAND SHOWER.

3/4" X 3/4" NPT UNION
(NOT SUPPLIED) (19 mm X 19 mm)

HOT

COLD

3/4" NPT (19 mm) 

AERATOR

TRANSFER

KNOB

3/4" NPT
(19 mm) 

2

1

IMPORTANT: It is strongly recommended that

access be provided for all enclosed mechanical

parts to this system.

HAND SHOWER

Содержание Percy Series







Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды