- 4 -
M965582 REV. 1.8 (5/18)
4
5
6
TEST INSTALLED FAUCET
SERVICE
SERVICE
DO: SIMPLY RINSE THE PRODUCT CLEAN WITH CLEAR WATER. DRY WITH A SOFT COTTON FLANNEL CLOTH.
DO NOT: DO NOT CLEAN THE PRODUCT WITH SOAPS, ACID, POLISH, ABRASIVES, HARSH CLEANERS, OR A CLOTH
WITH A COARSE SURFACE.
• Turn HANDLE
(1)
to “off” position.
• Remove AERATOR
(2)
using the KEY
(3)
.
• Turn hot and cold water supplies on. Operate
HANDLE
(1)
to flush water lines thoroughly.
Check spout connections for leaks.
• Check all drain connections for leaks.
• Turn HANDLE
(1)
to OFF position.
Replace AERATOR
(2)
.
1
2
3
OFF
ON
COLD
HOT
CAUTION
Turn off hot and cold water
supplies before beginning.
A
B
C
FACTORY SETTING
COLDER
MIX
HOTTER
MIX
1
9
4
10
8
6
7
5
5
11
11
11
11
2
3
• To remove or replace cartidge:
— Turn valve to OFF position.
— Pull out PLUG BUTTON
(1)
and loosen HANDLE SCREW
(2)
.
— Pull off HANDLE
(3)
.
— Unthread and remove CARTRIDGE NUT
(4)
with CARTRIDGE RING
NUT KEY
(8)
.
For Polished Chrome
— Pull CARTRIDGE COVER
(10)
off and unthread CARTRIDGE
RING NUT
(9)
.
For Brushed Nickel and Matte Black
— Pull out CARTRIDGE
(5)
. Inspect CARTRIDGE
(5)
and
O-RINGS
(6)
for debris and clean if necessary.
— Clean MANIFOLD
(7)
and rinse clean.
— Reinstall CARTRIDGE
(5)
and O-RINGS
(6)
onto MANIFOLD
(7)
.
— Reinstall CARTRIDGE NUT
(4),
CARTRIDGE RING
NUT KEY
(9)
and HANDLE ASSEMBLY
(3)
.
For Polished Chrome
— Reinstall CARTRIDGE RING NUT
(9),
CARTRIDGE
COVER
(10)
and HANDLE ASSEMBLY
(3).
For Brushed Nickel and Matte Black
• If spout drips, operate handle several times from OFF to ON
and HOT to COLD position. Do not force handle.
ADJUST HOT LIMIT SAFETY STOP
By restricting HANDLE rotation and limiting the amount of
hot water allowed to mix with the cold, the HOT LIMIT SAFETY
STOP
(11)
reduces risk of accidental scalding. To lower the
maximum hot water temperature of your faucet, all you need to
do is adjust the setting on the HOT LIMIT SAFETY STOP
(11)
.
Note:
The HOT LIMIT SAFETY STOP
(11)
is set at the maximum
hot temperature setting from the factory.
Fig. A.
To adjust HOT LIMIT SAFETY STOP:
• Remove HANDLE ASSEMBLY
(3)
and CARTRIDGE NUT
(4)
.
• Pull out CARTRIDGE
(5)
.
• Pull off the HOT LIMIT SAFETY STOP
(11)
.
• Rotate the HOT LIMIT SAFETY STOP
(11)
counter-clockwise for
a hotter mix or clockwise for a colder mix. Replace the HOT LIMIT SAFETY STOP
(11)
.
Fig. B & C.
• Reinstall CARTRIDGE
(5)
, CARTRIDGE NUT
(4)
and HANDLE ASSEMBLY
(3)
.
