DXG DXG-202V, Руководство пользователя

Страница: 29 / 35

28
You will need to connect the Digital Video Camera to your computer's USB port to
transfer photos into your computer. This section shows how you can connect the
Digital Video Camera to your computer.
First, you must install the Digital Video Camera Driver from the software CD-ROM
before connecting to ensure your computer functions properly with USB. See the
section "Installing Software" for details on how to install the driver.
Using the Digital Video Camera as a Web camera or as a Mass
Storage Drive
When you connect the Digital Video Camera to your computer, you can use it as
a Web camera or as a Mass Storage drive. You can then join in video conferencing
sessions on the Internet. You need to install the Digital Video Camera Driver and
required application softwares from the software CD-ROM before you can start
using it as a Web camera. See the section "Installing Software" for installation
instructions.
Using the Digital Video Camera as a Web camera lets you capture video directly
into your computer for later editing or enhancing your videos. See the section
"Installing Software" for installation instructions.
●
Step 1. Make sure the Digital Video Camera has two ”AA”
batteries in the compartment.
●
Step 2. Connect the smaller end of the USB
cable into the USB port of your Digital
Digital Video Camera.
Note: Make sure to gently plug the USB cable in the right direction to avoid
possible damage to USB connector.
●
Step 3 Connect the other end
of the USB cable to the
USB port located on the
back of your computer.
The Digital Video Camera’s LCD
Panel will turn on and enter
PC Connection Menu.
5. Connecting to Your Computer