YAESU
8-Pin Round Mic Connector -
TGR-SL-CAB8R
Radio Models
Pin-out
Notes
JP-1
FT-1
FT-107/107M
FT-290
FT-707/736/736R
FT-747/757
FT-757GX/767GX
FT-840
FT-847
**
FT-890
**
FT-920
**/
950
**/980
**
FT-990
**
FT-1000
**
/1000D
**
FT-1000MP
**
FT-2000/2200
FTDX5000
**
FT-5100
Check the SLMOD8RY
Jumper Module list
Pin 1 – N/C
Pin 2 – N/C
Pin 3 – N/C
Pin 4 – N/C
Pin 5 – N/C
Pin 6 – PTT
Pin 7 – GND
Pin 8 – Mic Input
**On the FT-890, FT-980, FT-990, and the FT-1000
and 1000D, you should also jumper Pin #2 and Pin #5
to Ground.
**On the FT-847, FT-920, FT-950, FT-1000MP and
FTDX5000, you should also jumper Pin #5 to Ground.
Speaker audio is available on some models. Check
your radio manual for availability of these signals and
add the appropriate jumpers.
Check Other Listings for these radios - you may be
able to use the DIN, PACKET, ACCESSORY, or
DATA jack
When using the SLMOD8RY
- check jumpers: G1 + G2 installed for: FT-890/980/990/1000/1000D
(picture in section on modules) Only G1 installed for: FT-847/920/950/1000MP
YAESU
RJ-11 Mic Connector -
TGR-SL-CABRJ1
Radio Models
Pin-out
Notes
JP-1
FT-90/90R
FT-100
**
FT-1500M
FT-1802
FT-1900R
FT-2600
FT-2800M
FT-2900R
FT-7800R
FT-7900R
FTM-350
Pin 1 – N/C
Pin 2 – N/C
Pin 3 – +9V
Pin 4 – GND
Pin 5 – Mic Input
Pin 6 – SW1
Pin 7 – N/C
Pin 8 – N/C
**With the FT-100, the PTT jumper MUST be replaced
with a standard 1/4 watt 27k resistor.
Other Yaesu models with an RJ-11 Mic jack might also
use these same settings (check your radio manual).
Check Other Listings for these radios - you may be
able to use the DIN, PACKET, ACCESSORY, or
DATA jack
YAESU
RJ-45 Mic Connector -
TGR-SL-CABRJ4
Radio Models
Pin-out
Notes
JP-1
FT-2400
FT-2500
Pin 1 – N/C
Pin 2 – Speaker
Pin 3 – PTT
Pin 4 – Mic Input
Pin 5 – GND
Pin 6 – N/C
Pin 7 – N/C
Pin 8 – N/C
Speaker audio is available on some models. Check your
radio manual for availability of these signals and add the
appropriate jumpers.
Check Other Listings for these radios - you may be
able to use the DIN, PACKET, ACCESSORY, or
DATA jack
