DX Engineering DXE-VRW-1, Быстрый старт

Страница: 4 / 8

- 3 -
Assembly
1. The winch handle is screwed onto the winch followed by the spring and nut as shown below.
2. Use a 3/4" wrench and tighten the nut. The threads on the winch are tapered, so the nut will stop
prior to running out of threads in the winch.
3. The 2 in x 15 ft long Polyester web strap with hoop and hook is mounted to the winch using the
3/8-16 x 3-1/2" long Grade 8 Hex Head Cap Screw, two 3/8" Stainless Steel Flat Washers and
one 3/8-16 Stainless Steel Nyloc Nut. Insert the Hex Head Bolt through the loop in the strap as
shown below.