- 2 -
DXE-VRW-1 Parts List
DXE-VRW-1 Manual Winch Assembly
QTY
Description
1
1,500 Lb Exposed Gear Hand Winch with Brake
3
3/8-16 x 1-3/8" long Stainless Steel Hex Head Cap Screw
8
3/8" Stainless Steel Flat Washer
4
3/8-16 Stainless Steel Nyloc Nut
1
2" x 15 ft long Polyester web strap with hoop and hook
1
3/8-16 x 3-1/2" long Grade 8 Hex Head Cap Screw
Note:
UMI-81343
Never-Seez or
DXE-NSBT8
Anti-Seize should be used on all clamps, bolts and
stainless steel threaded hardware to prevent galling and to ensure proper tightening.
As supplied, the winch has hardware that is not used. The wire cable retainer with screw and keps
nut are not used. The 3/8" x 2-1/2"" long bolt and 3/8-16 hex nut are not used.
The 3/4" nut and spring supplied with the winch
are
used.
Additional hardware that is required is supplied:
Three 3/8-16 x 1-3/8" long Stainless Steel Hex Head Cap Screws
Eight 3/8" Stainless Steel Flat Washers
Four 3/8-16 Stainless Steel Nyloc Nuts
One 3/8-16 x 3-1/2" long Grade 8 Hex Head Cap Screw
One 2" x 15 ft long Polyester web strap with hoop and hook
