- 15 -
12. Locate the stainless steel Antenna Hook Mounting Plate, two U-Bolt Saddle blocks, two
stainless steel U-Bolts, four stainless steel 3/8" flat washers, four stainless steel 3/8" split lock
washers and four stainless steel 3/8-16 hex head nuts.
Loosely assemble (one or two threads beyond the end of the hex nuts) the two U-Bolts and
associated hardware to the antenna hook mounting plate as shown below. The U-Bolts will be
tightened in the next assembly step.
13. Loosen the U-Bolts enough to slide the Antenna Hook Mount assembly over the 3" OD antenna
lower element on the base assembly. Position the antenna hook mount approximately 1/2" above
the insulated channel as shown below.
