- 18 -
DXE-RADW-20RT/-32RT/-65RT Pre-Assembled, Radial Wire, w/ 1/4" ring Terminals, 20 Pack
The DXE-RADW Radial Wire Kits include the highest quality 14 gauge stranded copper wire with a relaxed black PVC
insulation for easy installation of your radial system. They allow fast and easy installation of your radial ground system,
and permit you to mix and match different length to fit the available space. The stranded wire and relaxed insulation
mean that the wire will lay flat as you place it on the ground - easy to install! The twenty pre-cut radial wires include
1/4" ring terminals professionally crimped on one end for quick and easy attachment to the radial plate. These Radial
Wire Kits are designed for users of vertical antenna systems which have the need for a high quality radial system for
optimum antenna performance. The 1/4" ring terminals are machine crimped for maximum grip. Soldering is not
required for strength, but is recommended if installed in corrosive environments such as salt spray.
Packed 20 Radial Wires per package
14 gage, stranded copper wire
Black relaxed PVC insulation
1/4" Ring Terminal professionally crimped on each Radial Wire
3 lengths to choose from: 20 Ft (-20RT), 32 Ft (-32RT), 65 Ft (-65RT)
DXE-STPL - Radial Wire Anchor Pins, 100/pack - No need to bury your radials!
DX Engineering Radial Wire Anchor Pins are perfect for fastening radials below the grass line to eliminate the risk of
damaging your radials during lawn maintenance.
100 count - 6'' Pins
11-Gauge
DXE-STPL-100P
Radial Wire Anchor Pins, 100/pack
DXE-STPL-300P
Radial Wire Anchor Pins, 300/pack
DXE-STPL-100BD - Radial Wire Staple, Biodegradable, 3", 100 pack
DX Engineering DXE-STPL-100BD is a 100-pack of 3”
biodegradable
anchors that are produced from
recycled PLA (Polylactide Resin). Depending on the weather conditions, they will degrade in about a year.
They are easily installed and will hold radial wires in place until lawn roots overtake them - and then
disappear. Ecologically friendly!
TES-2155 - 3M Temflex™ 2155 Rubber Splicing Tape
.
Conformable self-fusing rubber electrical insulating tape. It is designed for low voltage electrical insulating
and moisture sealing applications. For outdoor use, it should be protected from UV deterioration with an
overwrap of
TES-06132.
TES-06132 - Scotch® Super 33+
.
Highly conformable super stretchy tape for all weather applications. This tape provides flexibility and easy
handling for all around performance. It also combines PVC backing with excellent electrical insulating
properties to provide primary electrical insulation for splices up to 600V and protective jacketing.
DXE-363-SST - Bulkhead Fitting, SO-239 Socket, Silver Plating, PTFE Insulation
This hi-quality bulkhead connector uses silver plated outer and inner conductors and a PTFE insulator. The connector
has very low loss and high electrical break down. It comes with two nuts to secure the connector to our radial plate or
other flat surface. Perfect for use with the DX Engineering Radial Plate, (
DXE-RADP-3
) it ensures the radial ground
system, the antenna ground and the feedline shield are common. It can also be used in other coaxial
applications where the male ends (PL-259) of 2 coax cables need to be connected, such as when joining
two pieces of coax together. Don't forget to waterproof coaxial connections.
Silver plated, PTFE insulated, Very low loss, High electrical break down
2 in. long
DXE-RADW-20RT
Package of 20 each 20 Ft Radials with 1/4" Ring Terminals
DXE-RADW-32RT
Package of 20 each 32 Ft Radials with 1/4" Ring Terminals
DXE-RADW-65RT
Package of 20 each 65 Ft Radials with 1/4" Ring Terminals
