- 14 -
DXE-STPL-100BD - Radial Wire Staple, Biodegradable, 3", 100 pack
DX Engineering DXE-STPL-100BD is a 100-pack of 3”
biodegradable
anchors that are produced from recycled PLA
(Polylactide Resin). Depending on the weather conditions, they will degrade in about a year. They are easily installed and
will hold radial wires in place until lawn roots overtake them - and then disappear. Ecologically friendly!
DXE-225RT-20 - Ring terminal 16-14 Wire Gauge, 1/4" hole/20-pk
This is a set of 20 ring terminals for AWG #14 to 16 wire with a clearance hole for a 1/4" bolt. These are the same crimp
terminals supplied with the DXE Radial Wire Kits for #14 Radial and Antenna Wire.
DXE-RADP-1HWK - Radial Plate Wire Attachment Hardware Kit - Stainless Steel
20 Sets of ALL Stainless Steel Radial Hardware for use with the DX Engineering Stainless Steel Radial Plate.
(20) 1/4'' Bolts - (20) 1/4'' Nuts - (20) 1/4'' Flat Washers - (20) 1/4'' Split Washers - (20) 1/4'' Star Washers
SUM-900031 - Automatic Wire Stripper/Crimper/Cutter, 24-10 Ga.
Our DX Engineering wire stripper uses a spring-loaded design to make quick work of wires ranging from 24 to 10 gauge. Just insert
the wire, squeeze the handle, and listen for the click. That’s the sound of another perfect wire stripping job performed in about 2
seconds- a fraction of the time it takes your pocket knife to do the same job. An adjustable wire length guide helps you
make uniform strips, and a built-in wire cutter and crimper helps you complete your wiring job.
Spring-loaded design
Strips wires ranging from 24 to 10 gauge
built-in wire cutter and crimper
DXE-SSVC-2P - Stainless Steel V-Clamp for steel pipe, 2 inch V-bolt
This V-Clamp is made in one size that fits Steel tubing or pipe from 1" to 2'' OD as used in antenna construction. The supplied V-
bolt is long enough to attach tubing to thick plates and is made with anti-corrosive properties. The special Stainless Steel
saddle has serrated teeth will clamp to the pipe securely by biting into the surface. For this reason, it is not
recommended for softer aluminum tubing or pipe. Ideal for fastening a radial plate and antenna mounting to a steel pipe.
Used to clamp 1 to 2'' (OD) steel tubing or pipe
Designed for attachments that don't require resistance to torque
V-bolt and saddle made from high-strength 18-8* stainless steel
*The use of an anti-seize compound is HIGHLY recommended to achieve proper torque and prevent galling.
