- 2 -
80 meter Tuning Coil - DXE-SA80-AOK
The
DXE-SA80-AOK
80 meter coil add-on kit is custom designed for use with the
DXE-ATSA-1
antenna system. In some ATSA antenna installations with excellent radial systems, achieving the
best SWR on a vertical element for 80 meters may be difficult without some means of adjusting
feedpoint impedance.
The
DXE-SA80-AOK
allows easy adjustment for lowest SWR. The
DXE-SA80-AOK
will aid in
tuning a low impedance antenna to the minimum SWR in the customer selected portion of the 80
meter band without affecting operation on the other, higher frequency bands. The #12 AWG coil
wire is tin-nickel plated for high power handling, corrosion resistance, ease of soldering and long
term reliability.
Parts List for the DXE-SA80-AOK
Quantity
Description
1
DX Engineering custom variable inductor coil for 80 meters for use on the
DXE-ATSA-1
with Machined "L" Bracket, connection wire and ring terminal attached
1
Machined Insulated Mounting Bracket
2
10-24 Stainless Steel Nyloc Nut
2
10-24 x 1" Stainless Steel Hex Head Bolt
3
#10 Stainless Steel External Tooth Washer
4
#10 Stainless Steel Flat Washer
1
#10 Stainless Steel Hex Nut
Installing the Optional 80 meter Tuning Coil - DXE-SA80-AOK
The
DXE-SA80-AOK
80 meter coil add-on kit is custom designed for use with the ATSA antenna
system. In some ATSA antenna installations with excellent radial systems, achieving the best SWR
on a vertical element for 80 meters may be difficult
without some means of adjusting feedpoint impedance.
The
DXE-SA80-AOK
allows easy adjustment for
lowest SWR. The
DXE-SA80-AOK
will aid in tuning
a low impedance antenna to the minimum SWR in the
customer selected portion of the 80 meter band without
affecting operation on the other, higher frequency bands.
The #12 AWG coil wire is tin-nickel plated for high
power handling, corrosion resistance, ease of soldering
and long term reliability.
Refer to the shelf hole layout drawing in
Figure 1
.
There is one radial wire mounting hole used to mount
Figure 1
the
DXE-SA80-AOK
. Remove the existing radial wire
and hardware. Move the removed radial wire to the
