32
DXE-UT-KIT2-D - Complete Coax Cable Prep Tool Kit
This cost-saving kit provides a handsome, convenient carrying case complete with all seven DX Engineering
coaxial cable prep tools and accessories. It features a rugged, lockable enclosure is fitted with a precut foam
insert with a home for each tool. The
DXE-UT-KIT2
provides the case complete with the following:
DXE-UT-8213
- Stripping Tool for RG-213 size cable
DXE-UT-808X
- Stripping tool for RG-8/X size cable
DXE-UT-80P
- PL-259 Assembly Tool
DXE-UT-80N
- Two-piece N connector Assembly Tool
CNL-911
- Coaxial Cable Shears
DXE-170M
- Precision Braid Trimmers
DXE-UT-RB-HD
- Heavy duty Stripping Tool Replacement Blades
+ an Extra Compartment for Coax Connectors, etc.
The case-only may be ordered as DXE-UT-CASE, or a Partial Kits with case may be ordered as
DXE-UT-
KIT1-D
- depending on your needs and usage.
Technical Support
If you have questions about this product, or if you experience difficulties during the installation, contact DX
Engineering at (330) 572-3200. You can also e-mail us at:
For best service, please take a few minutes to review this manual before you call.
This unit is RoHS (Reduction of Hazardous Substances) compliant. The components, including the solder
used are all lead free. If you decide to do any modifications or internal repairs, you should use only lead free
solder and lead free soldering tools. Lead free solder melts approximately 100 degrees higher than the
old leaded solder, so you may need to upgrade your current soldering system.
Warranty
All products manufactured by DX Engineering are warranted to be free from defects in material and workmanship for a period of one (1) year from
date of shipment. DX Engineering’s sole obligation under these warranties shall be to issue credit, repair or replace any item or part thereof which is
proved to be other than as warranted; no allowance shall be made for any labor charges of Buyer for replacement of parts, adjustment or repairs, or
any other work, unless such charges are authorized in advance by DX Engineering. If DX Engineering’s products are claimed to be defective in
material or workmanship, DX Engineering shall, upon prompt notice thereof, issue shipping instructions for return to DX Engineering (transportation-
charges prepaid by Buyer). Every such claim for breach of these warranties shall be deemed to be waived by Buyer unless made in writing. The above
warranties shall not extend to any products or parts thereof which have been subjected to any misuse or neglect, damaged by accident, rendered
defective by reason of improper installation, damaged from severe weather including floods, or abnormal environmental conditions such as prolonged
exposure to corrosives or power surges, or by the performance of repairs or alterations outside of our plant, and shall not apply to any goods or parts
thereof furnished by Buyer or acquired from others at Buyer’s specifications. In addition, DX Engineering’s warranties do not extend to other
equipment and parts manufactured by others except to the extent of the original manufacturer’s warranty to DX Engineering. The obligations under
the foregoing warranties are limited to the precise terms thereof. These warranties provide exclusive remedies, expressly in lieu of all other remedies
including claims for special or consequential damages. SELLER NEITHER MAKES NOR ASSUMES ANY OTHER WARRANTY
WHATSOEVER, WHETHER EXPRESS, STATUTORY, OR IMPLIED, INCLUDING WARRANTIES OF MERCHANTABILITY AND
FITNESS, AND NO PERSON IS AUTHORIZED TO ASSUME FOR DX ENGINEERING ANY OBLIGATION OR LIABILITY NOT STRICTLY
IN ACCORDANCE WITH THE FOREGOING.
©DX Engineering 2012
DX Engineering®, DXE®, Hot Rodz™, Maxi-Core™, THUNDERBOLT™, Antenna Designer™, Yagi Mechanical™, and Gorilla Grip® Stainless
Steel Boom Clamps, are trademarks of PDS Electronics, Inc. No license to use or reproduce any of these trademarks or other trademarks is given or
implied. All other brands and product names are the trademarks of their respective owners.
Specifications subject to change without notice.
