- 5 -
Parts Lists
Parts Common to Both 8040 and 8040S Models
Qty
Part Number
Description
1
DXE-NVIS-MAST
Tubes and Hardware for the NVIS Mast
(1) 2” OD x 4 feet long, fiberglass tube
(1) 1-3/4” OD x 4 feet long, fiberglass tube
(1) 1-1/2” OD x 4 feet long, fiberglass tube
(1) 1-1/4” OD x 4 feet long, fiberglass tube
(1) Compression Clamp 2” to 1-3/4”
(1) Compression Clamp 1-3/4” to 1-1/2”
(1) Compression Clamp 1-1/2” to 1-1/4”
(1) Band Clamp for, 2.250" OD (use 5/16” Nut Driver)
(2) Band Clamp for, 2.000" OD (use 5/16” Nut Driver)
(2) Band Clamp for 1.750" OD (use 5/16” Nut Driver)
(1) Band Clamp for 1.500" OD (use 5/16” Nut Driver)
(1) Black Vinyl Cap for 1-1/4” Fiberglass Tube
1
COM-BAL-11150T
COMTEK 1:1 Single Core Balun
1
DXE-NVIS-BMB
Balun Mounting Bracket with Stainless Steel Hardware
(2) Hex Head Nut, Nyloc, Stainless Steel
(2) Flat Fender Washer, Stainless Steel
(2) DXE-ECLS-150 Studded Band Clamp, Stainless Steel, w/ hardware
1
DXE-CSR8X-1
Cable Strain Relief Kit for 8X Coaxial Cable
1
DXE-8XDX100
RG-8X Coaxial Cable, 100 Ft, with PL-259 connectors
1
SYN-DBR-125-100
Antenna Support Rope, 0.125” dia, 100 FT
2
DXE-TGI-2
Glass Antenna Insulators (2 packages, total of 4 insulators)
1
DXE-TENTPEGS4
Tent Peg Ground Stakes, Aluminum, 4
DXE-NVIS-8040
Qty
Part Number
Description
3
DXE-ANTW-75
Premium Antenna Wire, 14 ga, Relaxed PVC, 75 feet per roll
Plus the common parts listed above
DXE-NVIS-8040S
Qty
Part Number
Description
2
DXE-ANTW-75
Premium Antenna Wire, 14 ga, Relaxed PVC, 75 feet per roll
1
DXE-NVIS-80RES
(2) Resonator Coils for the 80 meter NVIS-8040S antenna
(2) MSG-ADC03 Wire Strain Relief Clamp, 3 mm
Plus the common parts listed above
NOTE:
For those that have their own non-metallic 15 foot mast, you can purchase the NVIS
antenna kits with all the parts except the mast assembly. Part numbers for those antenna kits are:
DXE-NVIS-8040NM
and
DXE-NVIS-8040SNM.
DXE-NVIS-8040NM DXE-NVIS-8040SNM
