- 10 -
Attaching the antenna element Wires to the Balun
Both models (
DXE-NVIS-8040
and
DXE-NVIS-8040S
) use the same method for attaching the
antenna wires to the balun.
Wires
A
and
B
are connected to the BALUN for the
DXE-NVIS-8040
Wires
A
and
C
are connected to the BALUN for the
DXE-NVIS-8040S
Attaching the 40 and 80 meter Wires for the DXE-NVIS-8040
1. Install one 40 meter wire (
A
) and one 80 meter wire (
B
) on each side of the Balun Bracket for
the
DXE-NVIS-8040
as shown.
Note how the wires route through the three serpentine slots. Allow a bit of extra wire so there is
no strain on the wires when connecting them to the balun.
DXE-NVIS-8040
