- 5 -
5. When the upper antenna parts are mounted to the base assembly (see previous installation
instructions), install the Studded Band Clamp on the first element just above the black insulator
with the stud facing the side nearest the tuner connections. Install the 10” long tuner wire from
the studded band clamp using the #10 hardware. The other end of the 10” wire is connected to
the tuner output wing nut connection as shown.
The feedline coaxial cable connects to the Antenna Tuner to the Bias-T in the radio room.
Two views showing the
MFJ-998RT installed on the
DXE-MBVE-5A antenna
