- 3 -
DXE-MBVE-TBHW
DXE-MBVE-TBHW Mounting Hardware Kit
For the MFJ-998RT Tuner mounting option
Qty
V-Block Saddle, Aluminum
2
U-
Bolt, Stainless Steel, 3.75” x 5/16”-18
2
Tuner Shelf Bracket, Stainless Steel
1
5/16” Washer, Split Lock, Stainless Steel
4
5/16” Washer, Flat, Stainless Steel
4
5/16” Washer, External Tooth, Stainless Steel
4
5/16” Hex Nut, Stainless Steel,
4
2.25” Element Clamp with Threaded Stud, Stainless Steel
1
10-24 Hex Nut, Stainless Steel
1
1/4”-20 x 3/4” long Hex Bolt, Stainless Steel
4
1/4”-20 Hex Nut, Stainless Steel
4
1/4”-20 Acorn Hex Nut, Stainless Steel
4
1/4” Washer, External Tooth, Stainless Steel
8
#10 Washer, Split Lock, Stainless Steel, Thick
1
#10 Washer, Flat, Stainless Steel, Thick
2
#10 Washer, External Tooth, Stainless Steel
1
10” Wire Assembly, 12 ga, Black Insulated, two #10 ring terminals
1
Installing the MFJ-998RT option
The MFJ-998RT Tuner is mounted on a custom made stainless steel shelf that is attached to the
DXE-MBVE-5A
antenna.
1. Install the four 1/4”-20 x 3/4” long Hex Head Cap Bolts, four 1/4” External Tooth Washers and
four 1/4”-20 Hex Nuts on the tuner shelf bracket as shown. The hex bolt heads will be on the
same side as the logo on the tuner shelf bracket.
2. Loosely install the two 4” long U-bolts, two V-saddle clamps with the 5/16”-20 Hex Nuts, 5/16”
Flat Washers, 5/16” Split Lock Washers and 5/16” External Tooth Washers as shown on the
tuner shelf bracket.
