- 20 -
Installation of UNUN Assembly to Antenna Lower Section
The completed UNUN and UNUN Mounting Bracket assembly are mounted to the antenna lower
section. To allow easy installation of the UNUN Bracket to the lower base section, open the upper
and lower custom studded element clamps as shown in
Figure 13
.
Figure 13
Position the UNUN Mounting Bracket so the bottom element clamp is located between the
feedpoint hardware and the U-Bolt as shown in
Figure 14
. Tighten the element clamps to hold the
assembly in place.
Figure 14
A: Clamps open, Clamp Ends inserted to go around Base Section
B: Clamp Ends Starting to go behind Base Section
C: Clamps surround Base Section
