- 3 -
WARNING!
INSTALLATION OF ANY ANTENNA NEAR POWER LINES IS DANGEROUS
Warning
:
Do not locate any of the aluminum tubing near overhead power lines or other electric
light or power circuits, or where it can come into contact with such circuits. When installing any
antenna or aluminum tubing, take extreme care not to come into contact with such circuits, because
they may cause serious injury or death.
Overhead Power Line Safety
Before you begin working, check carefully for overhead power lines in the area you will be
working. Don't assume that wires are telephone or cable lines: check with your electric utility for
advice. Although overhead power lines may appear to be insulated, often these coverings are
intended only to protect metal wires from weather conditions and may not protect you from electric
shock
Keep your distance! Remember the 10-foot rule: When carrying and using ladders and other long
tools, keep them at least 10 feet away from all overhead lines - including any lines from the power
pole to your home.
Guy Rings
The included
DXE-GR-5P - DX Engineering Guy Rings
advance the art of
stabilizing vertical rigid telescopic tubing. These engineered and incredibly
strong Guy Rings are intended for rope guying DX Engineering, Hustler, and all
brands of aluminum tubing vertical antennas, as well as the DX Engineering
Telescoping Fiberglass and Aluminum Tubing Kits. DX Engineering Guy Rings
are made from the super strong, black UV resistant, glass-reinforced poly-resin
material. They are virtually impervious to extreme outdoor conditions and mechanical stress. With
their 1/2 in. thick center hole shoulder, these Guy Rings simply slide over their respective tubing
size and seat firmly against the top of the larger tubing section below. 5 Rings per set: Fits tubing
sizes 2”, 1-1/5”, 1-1/4”, 1” and 3/4”. The 3/4” Guy Ring will not be used with the DXE-ATK65A.
Assembly
For a full 65 foot length, the aluminum tubing sections are assembled starting at the bottom 2" OD,
heavy wall (.120") aluminum tube and working upward.
Note: Jet-Lube SS-30 (JTL-12555) should be used between all antenna element sections. Jet
Lube SS-30 is an electrical joint compound to affect a substantial electrical connection
between metal parts such as telescoping aluminum tubing or other antenna pieces. It
ensures high conductivity at all voltage levels by displacing moisture and preventing
corrosion or oxidation. Jet-Lube should also be used on all clamps, bolts and stainless
steel threaded hardware to prevent galling and to ensure proper tightening.
Содержание DXE-ATK65A
Страница 7: ... 7 Figure 3 Suggested Guying ...
