- 2 -
The DX Engineering
DXE-AOK-12M
kit adds 12 meter coverage to the Hustler BTV series of
vertical antennas without giving up any existing band coverage. This kit will operate across the
entire 12 meter band with an SWR of 1.5:1 or less and adds negligible wind loading to the antenna.
No disassembly of the existing antenna is required.
Simply install this kit, check the tuning (if
needed, make some minimal tuning
adjustments to the vertical) and you're on the
air with an additional band.
If your BTV is installed on the roof or in an
elevated position, four resonant radials for
12 meters should be added (9 ft., 4-5/8
inches each).
Included Materials
Pre-assembled 14 ga stranded, tin
coated, FLEX-WEAVE™ 12 Meter
element wire with soldered ring
terminals
Three Stainless Steel Band Clamps with
Threaded Studs
Bottom Stainless Steel mounting
bracket
Upper Insulated Mounting Bracket
Two 9 inch Hot Roz™ with black vinyl
covers for one end
Scotch-Brite® Pad for cleaning the
BTV base lower aluminum element
connection
All Stainless Steel Hardware
DXE-AOK-12M shown installed on a Hustler 6 BTV
with optional DXE-TB-3P Tilt Base and optional
DXE-AOK-DCF Direct Coax Feed
