WTDL-RX
3
The default wireless channel for Dwyer wireless devices is channel 11. Different
wireless channels may be used to create multiple networks in one area, or to
avoid wireless interference from other devices. The diagram below show the
orientations available of the switches for each channel. Channel 26 (all switches
in the up position) is not supported.
Channel 11
Channel 12
Channel 13
Channel 14
Channel 15
Channel 16
Channel 17
Channel 18
Channel 19
Channel 20
Channel 21
Channel 22
Channel 23
Channel 24
Channel 25
Channel 26
(not supported)
Follow the instructions below to configure the channel settings for Dwyer WTDL
Data Loggers.
WTDL-RX:
To program the channel on an WTDL-RX, first unplug the WTDL-RX.
Use a Phillips head screwdriver to unscrew the enclosure. The dip switches are
located on the front of the PCB circuit board. Change the dip switches to match
the desired channel settings by referring to the diagram above. Reconnect the
WTDL-RX.
Содержание WTDL-RX
Страница 2: ...Product User Guide ...
