Product User Guide
2
WTDL Series:
Switch the wireless ON / OFF switch to ‘0’. The dip switches
are located on the back of the device. Switch the wireless ON / OFF switch
back to ‘1’.
Deploying and Activating Devices
Step 1:
Plug the WTDL-RX into the USB port on the base station computer.
(Additional WTDL-RXs can be used as repeaters to transmit over greater distances)
Step 2:
If using multiple WTDL-RXs plug each one into a wall outlet in the
desired locations.
(If transmitting over a distance greater than 700 feet indoors or
2500 feet outdoors or there are walls/obstacles/corners that need to be maneuvered
around, set up additional WTDL-RXs as needed.)
Step 3:
Verify that the data loggers are in wireless transmission mode.
(See
Channel Programming steps above)
Step 4:
On a Windows PC, launch the DL700 software program. All active data
loggers will be listed in the software showing that the device(s) are recognized.
Step 5:
To activate the data loggers, click on one to highlight, then click
the
Claim
icon, and then click the
Start
button. Repeat this step to activate
additional listed data loggers.
Test Equipment Depot - 800.517.8431 - 99 Washington Street Melrose, MA 02176
Содержание WTDL-RX
Страница 2: ...Product User Guide ...
