WHEATON® Standard Roller Apparatus
13
DWK Life Sciences | 856.825.1100 |
www.dwk.com
| P/N 50099786 Rev. 11/2021
First Time Startup
The first time the unit is ever powered, the unit will be operating under stored factory default
settings. After a user inputs and saves new settings for a given unit, the unit power can be turned off
and the previously saved user settings will be restored when the unit is turned back on. Saved user
settings are bottle speed, bottle rotation direction, bottle speed tolerance, ramp time, bottle diameter,
and motor gear ratio.
3
MAIN OPERATION
When main power is applied, the roller apparatus display will initialize and show the installed
firmware revision number. The display will then continuously show the true bottle speed on the front
panel display.
The system will always power on in Operation Mode with all operational parameters set as they were
during the last use.
NOTE:
After receiving this system from the factory, the first time you turn it on, it will operate with
all options (including speed and bottle diameter) set to the factory defaults. You will need to set the
new system to your bottle diameter and desired speed before using for production. (see
section 2
above)
