OSD Menu_Exposure (cont.)
3
BACKLIGHT
Off
HME (highlight masking exposure) HME
allows objects to appear clearly on the
screen by
masking extremely bright areas. To setup
HME, set the level and color of the
HME mask.
have to be in
The lower the number, the darker the areas
order to be masked. Select from: 0 ~ 20.
Color: Set the color of the HME masks. Select from:
red and blue.
black, white, yellow, cyan, green, magenta,
BLC (backlight compensation)
If BLC is selected, adjust the size and position of the BLC mask:
- H-POS: Move the mask’s position left or right.
The higher the number, the mask will move to the right.
- V-POS: Move the mask’s position up or down.
The higher the number, the mask will move down.
- H-Size: Adjust the mask’s width. The higher the number, the
right-side panel of the mask will move further to the right.
- V-Size: Adjust the mask’s height. The higher the number, the
down.
bottom side panel of the mask will move further
WDR (Wide Dynamic Range)
If WDR is selected, adjust the WDR level (weight) in the sub-menu.
Select from low, middle, or high (default).
- WDR Mode: Line (sensor WDR), frame (double-scan WDR).
- ROI Mode: Enable WDR only in a set interest area.
- Weight: Available only when normal mode is selected.
ROI (Region of Interest)
To have a more efficient scene result, up to four (4)
regions are able to be selected for the WDR effect to
maintain the most suitable color appearances.
EXPO
EXPOSURE
BACKLIGHT
BACKLIGHT
BACKLIGHT
LENS
2-MOTOR
BRIGHTNESS
SHUTTER
BACKLIGHT
STARLIGHT
AGC
3D DNR
RETURN
LEVEL
COLOR
RETURN
H-POS
V-POS
H-SIZE
V-SIZE
RETURN
WDR MODE
ROI MODE
WEIGHT
RETURN
AUTO
10
AUTO
OFF
X4
10
HIGH
10
BLK
11
10
3
3
LINE
OFF
HIGH
3
19
