Installation - Instructions
13
Mounting template
Using the mounting template or your camera, mark
and drill the necessary holes
in the mounting
surface
.
Pull a
ll
necessary wires through and make the
proper connections.
See pages 14.
Use the
two
(2)
mounting screws to install the
camera on
to
the
mounting surface
.
See page
1
5
for
tilting and pan adjustment options.
Adjust the camera's zoom and focus using the
manual levers at the base of the camera module.
Up: zoom in / down: zoom out
Left: near / right: far
Once the power focus and zoom adjustment is
completed, the camera's motorized lens will re-
adjust automatically.
When the installation is completed, place the
camera's dome over the camera's body by clicking
the dome into place.
Detach
the
protective cover
from the dome to
complete the installation.
1
2
3
4
5
6
