37
Setup - Network Setup
SNMP Settings
1
SNMPv1/SNMPv2 -
Select the SNMPv1/SNMPv2 option and type the names of Read and Write communities.
SNMP trap can be used to check periodically for operational thresholds or failures that are defined in the MIB.
2
SNMP Trap -
Enable or disable the SNMP trap.
SNMPv3 contains cryptographic security, a higher security level, which allows you to set the Authentication
password and the Encryption password.
3
Mode -
Select the either Read or Read/Write mode.
4
Activation -
Select mode to enable or disable.
5
Read/Write name -
Define Read name and Write name.
6
Security Level -
Select one of no auth, no priv/auth , no priv/auth, priv
7
Authentication Algorithm -
Select MD5 or SHA as the authentication method.
8
Authentication Password -
The Authentication Password is encryption for authentication and they are at least
8 digits and up to 30 digits allowed.
9
Private-Key Algorithm -
Select DES or AES as the encryption algorithm.
10
Private-Key Password -
Information protection password is private encryption and they are at least 8 digits
and up to 30 digits allowed.
11
Click ‘Apply’ to save all settings.
4
5
3
6
7
8
9
10
11
2
1
