DW DWC-MPTZ5X, Руководство пользователя

Страница: 12 / 76

Before staring the installation, remove
protective foam from the camera’s lens. These
are used to protect the camera module during
shipment and should be completely removed
before powering the camera. To do so:
1. Detach the Gasket from the bottom of the
camera.
2. Detach the dome cover from the camera
module by loosening the three screws on
the cover dome.
3. Take off the protection P.E Foam from the
dome cover and lens.
4. Assemble the dome cover bottom case by
aligning the screw hole in the cover and
bottom case.
5. Assemble the bottom gasket to the
camera.
INSTALLATION [MPTZ5X]*
1 2
R e m o v i n g t h e p r o t e c t i o n p a r t s
Protection Foam
Protection Foam
Rubber
Gasket