SNMP Settings
Setup -
1
2
3
4
5
6
7
8
9
10
11
SNMPv1/SNMPv2
Select the SNMPv1/SNMPv2 option and type the names of
Read community and Write community.
SNMP trap can be enable or disable.
SNMP Trap
1
2
SNMP trap can be used to check periodically for operational
thresholds or failures that are defined in the MIB.
Select the either Read or Read/Write mode.
Mode
3
It can be enable or disable selected mode.
Activation
4
Define Read name and Write name.
Read/Write name
5
Select one of no auth, no priv/auth , no priv/auth, priv
Security Level
6
Select MD5 or SHA as the authentication method.
Authentication Algorithm
7
The Authentication Password is an encryption for
authentication and they are at least 8 digits and up
to 30 digits allowed.
Authentication Password
8
Select DES or AES as the encryption algorithm.
Private-Key Algorithm
9
Information protection password is a private encryp
-tion and they are at least 8 digits and up to 30 digits
allowed.
Private-Key Password
10
Click ‘Apply’ to make above setting effective.
11
SNMPv3 contains cryptographic security, a higher security
level, which allows you to set the Authentication password
and the Encryption password.
