SMTP Settings
Setup -
1
2
4
6
8
10
3
5
7
9
11
Mode
Select Security mode of SMTP from Plain or SSL / TLS. After
checking account setup of your SMTP Server, you may
select one.
SMTP Server Address
Define the SMTP Server Address. If the IP Address form is
incorrect, a Message box will be shown to try again.
2
General Setting
SMTP function can be enable or disable.
1
3
Port
Define the Port used in the Plain or SSL / TLS security mode
in the above.
4
To send / save the image to the relevant sites by Email, SMTP
needs to be setup.
User ID
Define the User ID to access to SMTP Server. Fill out the
correct User ID registered in the SMTP Server.
5
Password
Define the Password to access to SMTP Server. Fill out the
correct Password registered in the SMTP Server.
6
11
Click ‘Apply’ to make above setting effective.
E-Mail Sender
Define the e-mail address of E-Mail Sender. It will be
displayed as the sender when the camera sends an E-mail.
7
E-Mail Receiver
Define the e-mail address of E-Mail Receiver. It will be
displayed as the Receiver when the camera sends an E-mail.
8
Message
Define the contents of E-Mail when camera sends an E-mail.
The message of the Email is limited to 40 characters including
the spaces.
10
Title
Define the title of the E-Mail when the camera sends an
E-mail.
9
The title of the Email is limited to 40 characters including
the spaces.
