DW-CP04
SPECIFICATIONS
Network Connection
Ethernet (1 x Megabyte 10/100 Base-T)
Streaming
Transmission Speed Live
120/100fps @ D1 (NTSC/ PAL)
Access
Web Viewer
Live, PTZ Control, Playback up to 4 Channels
Minimum PC Requirements: Windows XP, or higher/
IE 6.x, or later/ Pentium4, 2GHz, 2G(RAM)
Video Card(256MB RAM, 1024x768)
Client Software
DW Spectrum
Recording
Compression
H.264 or MJPEG
Recording Mode
Scheduled, Motion, Event
Recording Rate
120fps @ D1 Resolution
Playback
Playback Rate
120fps @ D1 Resolution
Fast Forward Functions
FForward, FRewind, Frame-by-Frame Forward & Rewind
Search Modes
Date, Time, Event Preview
Storage
External Storage
Supports Micro SDHC for onboard storage ( up to 32 GB )
* SD Card not included
Interface
Alarm Input/ Output
4 Input/ 4 Output
RS-232
1 Port
RS-485
1 Port
Features
Alarm Management
Video Loss, Video Recovered, Motion Detection, Alarm
Activation, Reboot Complete, Serial Input, Schedule
Alarm Report
Notifications
E-mail & FTP notifications with Image attached
Security
Channel-based user password protection for live video,
PTZ, alarm output, and audio options
General
VIDEO
Video Input
4 Channels Analog
Video Enconding
Dual Codec (H.264 or MJPEG) with Single Stream Setup
Resolution
D1 (704x480), CIF (352x240), 160x112
Live Casting
Streaming up 120fps @ D1 Resolution
Audio
Input/ Output
1 Channel Input/ 1 Channel Output
Codec
8bit G.711, 8Khz, 8KByte/sec
SystemInfo
Memory
32bit RISC CPU, 128MByte Flash/ 128MByte SDRAM
OS
Embedded Linux
Performance
Network
Operating Temperature/ Humidity
-10~50°C (14~122°F)/ Less than 90% (Non-Condensing)
Electrical
Power Requirement
12V (1A) [AC100~240V, 50/60Hz, 300mA]
Power Consumption
DC12: 600mA
Dimensions
5.82 X 4.64 X 0.98 in (148(W)x118(D)x25(H) mm)
Weight
0.55lb (0.25Kg)
CONNECTION
DW SPECTRUM
WEB ADMIN
SETUP MENU
QUICK
CONFIGURATION
Accessing the Compressor’s Quick Configuration Menu:
1. From the Compressor’s main page, press the ‘Admin’ button at the
top right-hand corner of the screen.
2. Click on ‘Quick Configuration’ from the left-side menu bar.
3. Follow the Steps:
Step 1: View and modify the Compressor’s name.
Step 2: Setup the Server’s local date and time. If applicable, setup an
NTP server information for time sync.
Step 3: If necessary, modify the Compressor’s Network information,
including the IP Address, Subnet Mask, Gateway, and DNS. See page 1
in this QSG for additional information on how to edit the Compressor’s
network information via the IP Finder software.
Step 4: Setup a DDNS address for the Compressor for easy remote
access. See the manual for additional information.
Step 5: Setup a recording schedule for the Compressor. the Compres-
sor supports micro SD card up to 32GB.
Click Finish to save all chances or cancel to exit the configuration page.
Turn your Analog Security System into a Hybrid system by merging
the Compressor with Digital Watchdog’s Blackjack Powered by DW
spectrum Fusion Softwatre.
1. Make sure the Compressor and the Blackjack Server are on the
same network. (See Blackjack’s manual on how to add servers
manually).
2. Run the DW Spectrum client, and connect to the Blackjack Server.
3. The Compressor should automatically populate on the display tree
with each camera marked as its own channel.
NOTE: Digital Recording Licenses are necessary to record video from
the Compressor to the Blackjack.
DW-CP04 Quick Start Guide
Toll Free: 866.446.3595
Fax: 813.888.9262
www.digital-watchdog.com [email protected]
Compressor’s Admin Menu
