DeatschWerks
15-17 Mustang DW400 Fuel Pump Installation Guide
6
7 – install the supplied DW connector harness, the additional static ground inserts into the slot on the
assembly filter, the same as OE
8 – reinstall the assembly top-hat to the center/buckets assemblies and connect the electrical connector
harness to the hat assembly. Reinstall the fuel level sender and connector the electrical connector to the
assembly top-hat
9 – reinstall the assembly into the fuel tank and attach a length of hose to the outlet of the pump
assembly allowing it to drain into a fuel safe container and prime the fuel pump assembly
10 – cycle the key to the on position as many times as required to prime the pump assembly and evacuate
the air introduced during the pump installation process
11 – attach supply line to the outlet of the pump assembly
