Safety Instructions
1.
Carefully read these instructions before installing the camera.
2.
Make sure the camera is not exposed to moisture or liquids. Clean only with a dry cloth.
3.
Do not block any ventilation openings.
4.
Do not install any near heat sources (radiators, large power supplies, etc).
5.
Protect the power cord from being walked upon, pinched, or otherwise damaged.
6.
Installation should be done only by qualified personnel per local codes and regulations.
7.
Do not attempt to fix or replace any parts of the camera. Refer all servicing to qualified
personnel such as DVTel certified dealers and DVTel Technical Support Staff.
8.
Use only UL Listed Class 2 power supplies (12-24 VDC)
Regulatory Notice
This device complies with Part 15 of the FCC Rules. Operation is subject to the following
two conditions: (1) this device may not cause harmful interference, and (2) this device must
accept any interference received, including interference that may cause undesired operation.
The device has been tested and found to comply with the limits for a Class A digital device,
pursuant to part 15 of the FCC Rules.
2
