40
Enter a designation for the alarm input in the
Name
field. This name will be shown on the transmitter's Livepage
next to the associated alarm icon.
Alarm connections
The 7700 Series unit can be configured to connect to a specified remote location, such as a transmitter, when
an alarm is triggered.
Connect on alarm:
Select
On
, to establish a connection automatically to a specified IP address in the event of an alarm.
With the setting of
Follows input 1
, the 7700 Series unit establishes an automatic connection to a remote
location as long as an alarm signal is present at the alarm input 1.
Number of video receiver addresses:
The 7700 Series unit can store up to 10 IP addresses to contact in response to an alarm. In case of an alarm,
if the first IP address cannot be reached, the others will be tried in sequence until a connection can be
established. Select the contact priority of the IP address here.
Alarm IP address:
Enter the IP address of the device with which a connection is to be established in the event of an alarm.
Remote password:
Enter the password for the remote device (if it has one) that is to be contacted in response to an alarm.
Live video auto-connect:
Select
On
here if an active connection should be established after each reboot, for example following a
connection failure or power failure.
Содержание 7701DA
Страница 1: ...7700 Series User Manual...
