3
Mount the bulkhead BNC connector. (a,b) Then plug the two screwholes
left after the plate removal, with round-head screws from the SDI kit.
4
Locate the Expansion
Module connector (40 pin
IDC-type header) on the
Video Input board.
5
Locate the mounting holes
to the right of the Expan-
sion Module connector.
6
Snap the stand-offs into
each mounting hole.
7
Mount the SDI module
onto the Expansion
Module connector. Make
sure that the stand-offs
are lined up exactly with
the two mounting holes
on the SDI module.
Steps 7 & 8
Installation and Set-Up
(continued)
Steps 4 & 6
Step 3a
Step 3b
Step 3c
Step 3d
5
