DVDO EDGE GREEN, Руководство по эксплуатации продукта

Страница: 36 / 105

Section3: Operating DVDO EDGE GREEN with Remote and Menus
36
EDGE GREEN Main Menu: Select Input
There are 3 ways that input sources can be selected with EDGE GREEN:
1.
Auto Input Select - Switches inputs automatically (the default). This will automatically switch to an input when it is powered up (see
“Hints” for advice on establishing priorities when multiple devices have power on simultaneously.)
2.
Manual Input Select using the Input Select buttons on the remote control
3.
Manual Input Select using the menus .
Remember that when you use manual select, you are disabling Auto Select.
Input Select Using Auto Input Select
Automatic input switching is one of the features of your DVDO EDGE GREEN that makes your system easier to use. Using Automatic
Switching, you switch inputs by simply powering on a component. This is the default setting for EDGE GREEN, If you do not press any
of the Input Select buttons, and do not use the Menu to select an input, EDGE GREEN will continue to select inputs automatically.
When you select an input using the buttons on the remote, or using the menu, you are overriding the Auto Input Select feature. To
resume Auto Select operation, you must press the “AUTO” button on the remote control, or select Auto using the Input Select Menu.
Auto Input Select is based on powering up components. EDGE GREEN detects whenever a component is powered up, and assumes
this is the source you want to watch.
If you only have one input device (DVD, Blu-ray, etc.) powered on at any single time, then Auto Input Select should work perfectly with
no further adjustment. However, if you have several devices powered on at the same time, then Auto Input Select decides which one
to switch to based on the Priority assigned to each input. See “The Input Wizard--Step 2: Input Priority” for more details on setting
input priority.
Hints for using Auto Input Select
Suppose for example that you have only 2 inputs: a cable set-top box, and a DVD player, and you keep the set-top box on most of the
time. Set the priority so that your set top box has LOWER priority than your DVD player. Then, if you want to switch from watching
cable to watching a DVD, simply power up the DVD player. Your DVDO EDGE GREEN will recognize a new signal on the DVD input,
check the priority list, and then switch to DVD because it has HIGHER priority. This is a simple example, but the idea is to set priority
HIGHER for the Least-Used inputs.
DVDO EDGE GREEN will switch inputs automatically when you power up a
Higher-Priority component.