DVDO air3CPRO, Руководство пользователя

Страница: 6 / 8

Receiver Mounting
Wall mount - use standard drywall screws and mount the receiver directly to drywall
right through the holes in the case.
Ceiling mount - break off both tabs from bracket and using drywall screws mount bracket
to ceiling. Then clip receiver into bracket with mesh facing down and toward transmitter.
Back of TV mount - If your TV is on a hinged arm, use the included Wall/TV
mounting bracket and the adhesive pads to position the receiver as shown. Break off
extra bracket tab for smaller TVs. Using 2 pads is recommended.
Transmitter Mounting
Transmitter can be mounted to a wall/ceiling directly using drywall screws or placed
on top of a bluray or AVR. Unit should be placed with the DVDO logo rightside up.
For best performance, transmitter and receiver mesh faces should point at each other
or at a nearby surface for a bounced signal. (ceiling, wall)