RESIN STERILIZATION AND SALT ALARM
(OPTIONAL)
The GIX series volumetric softeners can be
equipped, upon request, with an optional device for
resin sterililzation.
Such device is installed in the body of the valve and
connected to the timer connector.
Once installed, the timer will start it during a
regeneration cycle.
Such device uses salt so as to carry out resin
disinfection.
If salt is not present, the device will not start. Once
the regeneration cycle is over, an orange led light will
turn on
– this means that salt shall be added in brine.
MAINTENANCE FOR THE INSTALLER:
For the equipment to work in optimal conditions, we
suggest
performing
the
following
operations
periodically: Clean the injector (B), its filter (D) and
the brine control (C), quick joints (A) at least once a
year
