DV Signage ViewStream 300, Руководство пользователя

Страница: 6 / 15

Page 6 of 15
o
Video output resolution: The ViewStream only supports playback standard
definition video, i.e. PAL & NTSC standards. Consequently a display with good
scaling will produce optimal results.
o
Aspect ratio: Many displays available are now widescreen type with an aspect
ratio of 16:9. However PAL/NTSC is 4:3. Consequently video output to
widescreen displays will be slightly stretched. In most cases this is not very
noticeable but if it is a concern it can be compensated for during the video
production and encoding process.
o
Monitor adjustment: VGA output is currently set to 1280x720 resolution which
may not be supported by all monitors. If the display looks reasonable but not
perfect please use the OSD settings of the monitor to adjust image position and
tuning (sometimes called phase). It may also be necessary to adjust image size.
OSD Configuration menu : In OSD configuration mode, you may need external buttons,
8-segmented touch screen or IR remote handset to operate.
o
Use with external button or 8-segmented touch screen
To enter OSD configuration mode, holding button 8 and power on the
VS-300 unit. The OSD menu screen will be shown as follow:
VOLUME 08 V1. 19. 00
Y M D H M S
2009 . 09 . 14 MON 21 : 00 : 12
ID NO: 0000
DATA LOGGING: OFF
OSD: ON
JPEG TRANS TYPE: OFF
SAVE AND EXI T
Press button 8 to select option.
Press button 7 or button 6 for change value
Press button 7 or button 6 to confirm “SAVE AND EXIT”.
o
Use with IR remote handset
To enter OSD configuration mode, holding “Display” key and power on
the VS-300 unit. The OSD menu screen will be shown as follow:
VOLUME 08 V1. 19. 00
Y M D H M S
2009 . 09 . 14 MON 21 : 00 : 12
ID NO: 0000
DATA LOGGING: OFF
OSD: ON
JPEG TRANS TYPE: OFF
SAVE AND EXI T
Press “Display” key to select option.
Press “+” or “-” key to change value.
Press “+” or “-” key to confirm “SAVE AND EXIT”.