DV Signage ViewStream 300, Руководство пользователя

Страница: 12 / 15

Page 12 of 15
When the vertical strips were found on the screen. That mean the VGA monitor connected
to the ViewStream 300/M3-300 did not have the corresponding matched input timing mode.
In this case, what we suggest to do is to adjust the phase frequency of the monitor until all
the stripes have been removed.
Each VGA monitor should has the Phase frequency adjustment (or called ‘H-size’, ‘H. Freq’,
etc) in OSD menu. Use this function to fine tune the phase until all the stripes are not seen.
This adjustment only done once in the first time setup and the monitor should remember
this phase settings.
Q:
A:
What is the best content (JPEG) resolution on VGA out ?
It depends on what VGA output resolution was set. If it was set to 1280x720, then
recommend to use the JPEG with 1280x960 resolution. If the VGA output was set to
640x480, then the JPEG with 640x480 or 800x600 resolution is suggested.
Q:
A:
How do I get the faster switching time/response time between JPEGs on VGA output
when a track is selected via button or touch ?
Select 640x480 output resolution on VGA output, and use the JPEG with 640x 480 or
800x600 resolution.